We’re often asked how to install and apply SPARTACOTE Metallic Concrete Coatings systems. This unique, artistic coating system is actually one of the easier SPARTACOTE systems to install. It consists of a black base primer coat, the Metallic mid-coat, and then a clear SPARTACOTE top coat. Installers may add SPARTACOTE GRIP for additional traction if the floor owners would like.
SPARTACOTE Metallic coating systems are popular in commercial retail environments, showrooms, theaters, entryways, bars, and restaurants.
We recently created this video, showing you how to install SPARTACOTE METALLIC Coating systems. This is the cobalt blue metallic coating. Directions follow the video script.
Prepare the concrete by mechanical profile, using a grinder to achieve a CSP 2.
Once the concrete is prepared, pour the black pigment bottle into Spartacote Flex SB part A. Mix thoroughly for two minutes with a slow speed drill. Once the pigmented material has fully dispersed, mix Part A with Spartacote Flex SB Part B in a separate container. Mix for two minutes with a slow speed drill.
Then, once mixing is complete, apply a ribbon of the black base coat of Spartacote material to the prepared concrete.
Using a Spartacote Broom, broom the material out onto the surface, spreading it evenly. Immediately following the broom, back roll the Spartacote material using a roller. Additional ribbons of material should be poured into the existing ribbons before it runs dry. Always maintain the wet edge.
After the black base coat cures, prepare the Metallic pigment coat.
Take the 8 oz Metallic pigment bottle and pour into 1 Gallon of Spartacote Flex SB part A clear. Mix thoroughly for two minutes.
In a separate container and once the pigmented material has fully dispersed, mix […]